Poweri-MIG 275P Pulse MIG Stick 220/240 Volt ~1 Phase Welder by Everlast Digital

Description

Power i-TIG 200T
310 579 2075
Home
About Us
Contact Us
Shop Policies
FAQ
Feedback
Store categories
DC TIG Welders
ACDC TIG Welders
MIG Welders
Stick Welders
DC Combo
ACDC Combo
MTS Combo
Coolers
Accessories
Plasma Cutters
Generators
SKU: POWER I-MIG 275P-NOVA
Product Description
Intended for those customers that are interested in a truly versatile MIG or for those interested only in MIG welding Aluminum, the Power i-MIG 275P incorporates many advanced features and capabilities that far exceed most MIG welders in it's class.   Beginning with a serious 50% duty cycle at 275 amps via dual fan cooling, this unit packs an industrial level punch without being overly large or dependent upon an intergrated undercarriage to move it around.  The digitally controlled IGBT component design delivers a stable, low spatter arc with the ability to weld with wire diamters from .023" to .045" with the standard supplied drive rolls.   Added to the same MIG features of Synergic and manual welding modes that you will find on the Power i-MIG 275S, the Power i-MIG 275P features an additional pulse MIG mode.  This single pulse mode is fully adjustable, with adjustments for pulse voltage, pulse time-on and pulse frequency and can be used to weld metals quickly and out of position without overheating them.  If you are new to the idea of MIG pulse, pulse is typically used in areas where the Axial spray process is desired, but due to the heat and inabilty to weld out of position it is prohibited.  A single-pulse MIG varies the voltage of the unit between two preset voltage levels. The other pulse controls control the duration and frequency of the pulse and are adjusted so that the MIG arc transfer transitions to spray, but drops out of spray range and settles to a globular transfer range long enough to cool the puddle, but not transfer any metal.   This pulse mode is typically used for welding on aluminum or stainless where heat issues are problems with traditional spray arc process.  In addition to the pulse mode, the Power i-MIG 275P the unit supports both spool gun and push-pull gun operation for both the hobbyist and the industrial level professional interested in using it for Aluminum welding.  Besides the standard manual mode, with the push-pull or spool gun connected, the user has the choice of pulse and for synergic operation.  For ease of set-up with multiple users or applications, the unit is also able to store up to 9 different programs.  Adjustable burn back, automatic pre/post gas flow, and inductance control also are included so that the user can completely customize and fine tune the MIG's performance.  In addition to the already excellent list of MIG features and performance, the Power i-MIG 275P also has a stick welding mode, which includes a E6010/Cellulose mode, hot star adjustments and arc force control.
PRODUCT FEATURES
Features & Benefits:
Synergic GMAW/SMAW Operation (MIG/Stick)
Single Pulse MIG welding capability up to 250 Hz
Industrial duty cycle of 50% at 275A
Spot and Stitch timers
Burn back control
Heavy Duty Cast aluminum feed mechanism with true 4 roll driven feeding
Euro Quick connect series 36 MIG gun (Binzel/Trafimet compatable)
Arc force control useful for fine tuning arc characteristics in MIG and Stick modes
Dual Digital Display allows precise and repeatable setting of welding parameters
Suitcase size, holds a 12" (30-44 lbs) roll of welding wire, or can use an 8" (10-12 lbs) with an adapter
Digitally Controlled IGBT Inverter with programmable memory
Stick weld features E6010 capability
WHAT'S INCLUDED
Standard Equipment:
12 ft. (4m) 36 series MIG gun with Euro quick-connect
Workclamp with cable
Stick Electrode Holder
Ar/CO2 Regulator
Spare Contact Tip
Spare drive rolls from .023" to .045" hard wire
OPTION
Optional Equipment:
5m 36 series MIG gun with Euro quick connect
Spool Gun
Push Pull gun
Flux Core drive rolls
Welding Cart
8" Spool adapter
RECOMMENDED USES
Recommended Areas of Use:
Home shop
Automotive garages/ Muffler shops
Fabrication/Industrial manufacturing.
Boat/ship building where quick laydown of aluminum is needed
Farm
Motorsports/Speed shops
Factory Repair/Maintenance
Recommended Metals:
Steel
Stainless
Chrome Moly
Aluminum (With optional spool or push-pull guns)
Recommended Metals:
Steel
Stainless
Chrome Moly
Aluminum (With optional spool gun)
TECH SPECS
Type:
Digital/Micro-controlled IGBT Inverter
Output /Process Type:
MIG, Stick
Voltage/phase:
220/240 V 1 PHASE
Max Rated MIG Amps:
275A
Max Rated Stick Amps:
200A
MIG Amps/Volts @ Rated Duty Cycle:
275A/30V @ 50% Duty Cycle/ 40º C
250A/26.5V @ 60% Duty Cycle/ 40º C
195A/25.6V @ 100% Duty Cycle/ 40º C
Stick Amps/Volts @ Rated Duty Cycle:
200A/28V @ 50% Duty Cycle/40º C
180A/27.2V @ 60% Duty Cycle/40º C
140A/25.6V @ 100% Duty Cycle/40º C
Max Inrush ( I1MAX ) Amps:
48.2A
Maximum Rated (I1EFF ) Input Amps:
35A
OCV:
70V
MIG Output Range:
30-275A/ 15.5-30V
Stick Output Range:
10-200A/20.4-28V
Variable MIG Inductance/Stick Arc Force Control:
Yes
Spool Gun Capable:
Yes
Pulse:
Single
Pulse Frequency:
10-250 Hz
Pulse Time On:
10-90%
Pulse Volts:
50-100%
Standard Drive Roll wire size:
.030”-.045”
Separate wire feeder:
No, self contained
Number of Drive rollers:
4
Max Wire Feed Speed:
600IPM
Max Wire Roll Diameter:
12” (full size up to 44lb)
Memory:
Yes
Preflow time:
0-10S
Post Flow Time:
0-10S
Flux Core:
Yes, Optional
2T/4T /Torch latch/Trigger:
No
Other Features:
9 Program Memory
E 6010 Stick
Spool gun and Push pull gun capability
Hot Start Time 0-2 Seconds
Hot Start Intensity 0-100%
MIG Inductance 0-100%
Synergic and Manual MIG modes
MINIMUM/MAXIMUM
Minimum/Maximum:
Weld up to a maximum of 5/8" in a single pass weld
Weld over 1" in multiple pass welds
Weld a minimum of 24 gauge
Returns
For returns, contact must be made within72 hours of delivery so an RMA number is issued. If there is damage, we can help file a damage claim immediately.
DOA items: In the event you receive a non working unit , we will exchange it free of charge.
Items returned must be in an GOOD condition. We will inspect all returns before accepting the package. We will not accept packages that have missing parts, damages, and packages that have not been approved for return by our initial contact or packages missing an RMA number. These packages will be refused and sent back to YOU at your cost.
Shipping Information:
1- We have an onsite professional shipping and packaging department and adhere to all shipping guidelines.
2- We will try to ship orders as soon as possible after payment approval unless otherwise stated in description. NOTE: Since there are many ways we offer our products, on rare occasions there is a chance an item may go out of stock that we have listed and sold on eBay. We will do our best to expedite backordered items as soon as possible.
3- Please provide a physical address. We will not ship to a PO Box.
4- Shipping charges are for the (48) Continental United States only.
5- We don’t ship to Canada
6- We charge CA tax on all orders 9.5%
7- If you pay via PayPal, shipping will be to your confirmed address only
8- Shipping to AK, HI and PR is more. please email for price.
Contact
Operating Hours:
Monday through Friday: 9AM to 5PM PSTSaturday: 11AM to 4PM (PST)
>