Everlast PowerMTS 211Si MIG DC TIG STICK 200 amp Multi-Process 110/220 Dual Volt

Description

Power i-TIG 200T
310 579 2075
Home
About Us
Contact Us
Shop Policies
FAQ
Feedback
Store categories
DC TIG Welders
ACDC TIG Welders
MIG Welders
Stick Welders
DC Combo
ACDC Combo
MTS Combo
Coolers
Accessories
Plasma Cutters
Generators
SKU:
P-MTS211SI
Product Description
If you are looking for an all around performer in the your fab shop, or need a go to unit on the work site, the PowerMTS 211SI has more than enough capability to handle most daily chores.  As one of the newest multi-process welders in the Everlast PowerMTS line, the unit has been completely redesigned with the user in mind.  This new digital inverter model features all the capability of previous generations but also adds synergic capability to the MIG component of the MIG/TIG/Stick welder.  The synergic offers quick setup and use of the welder based off of user input of wire diameter and metal type.  Manual override is always a choice when operating the unit in the Synergic mode so that the operator can fine tune the settings to the perform to his or her expectations.  The unit features a standard MIG mode as well and setup is fully controlled by the operator.  The welder is also equipped with a synergic spool gun mode for those that need it.
The panel and programming has been designed so that the operator has command of all the features without having to access complicated menus or open the cover.  Compare that to other models on the market, and you'll see how easy everything is to operate and connect by comparison.  The foot pedal and TIG torch are included and connect directly to the front.  There are no special adaptations or equipment needed to weld TIG.  The TIG torch does not need a manual gas valve because gas flow is controlled automatically and is programmable on the panel for both pre-flow and post-flow operation. This unit isn't sold primarily as a MIG like other brands and stick and TIG are added as an after thought.  No, rather the PowerMTS 211Si was designed to give excellent performance and convenience using any process it offers.
The unit also features solid TIG capability with an industry first:  High Frequency starting of the arc.  That's right.  In the compact Multi-process market, Everlast has designed and introduced a touchless TIG start for maximum weld quality.  Of course, the unit is still equipped with lift start capability if you are working in a place that is electronically sensitive to High Frequency.
Stick mode operation has been improved with the addition of Hot Start duration and Hot start intensity adjustments.  Combined with the arc force control this makes the 175 amp Stick mode very capable of handling up to 1/8" welding rods
PRODUCT EXTRAS
Features & Benefits:
All digital DC CC/CV Multi-Process inverter design offers the perfect welder for nearly every task.
Light weight design makes the unit extremely portable, ideal for jobsites and motorsports.
8" Diameter wire spool capacity provides a good compromise for long duration welding and portability.
Synergic MIG operation or Standard MIG operation.
Easy to use, operator friendly panel to select features.
Adjustable MIG Wave Form control manages slope/ inductance and fine tunes arc characteristics.
Adjustable Arc Force Control allows the user to dial in desired Stick welding performance.
Adjustable TIG Up/ Downslope allows the user to control the end of the welding cycle.
Adjustable Burn back control keeps wire energized after feeding stops to burn back the wire to a perfect length without needing to trim wire for restarts.
Foot Pedal for TIG  and TIG torch included.
Spool gun Capable for MIG
Exclusive 9 channel memory function allows favorite settings to be stored for quick setup.
High Frequency Start and Lift Start Modes for TIG
2T/4T torch trigger/latch function offers stepped control welding with TIG and MIG.
Adjustable Pre and Post flow for TIG and MIG operation improves over all weld quality by reducing porosity during start/stops
.
WHAT'S INCLUDED
Standard Equipment:
10 ft. Trafimet Series 15 MIG torch with Euro style quick connect fitting
Stick electrode holder with 10 ft cable and 35 series DINSE-style connector
Work clamp with 10 ft. cable and 35 series DINSE-style connector
12 ft. 26 Series TIG torch with cable and 35 series DINSE-style connector
Spare consumable starter kit (does not include tungsten)
Ar/CO2 Gas Regulator
OPTION
Optional Equipment:
Welding Cart
Series 17V gas valve TIG torch 15 or 25 Ft.
Argon Regulator
RECOMMENDED USES
Recommended Areas of Use:
Portable Repair
Automotive garages/Muffler Shops
Motor Sports
Construction sites
HVAC
Factory Maintenance
Farm
Light Industrial
Fabrication
Research/Education
Recommended Metals:
TIG:
Steel
Stainless
Chrome Moly
Titanium
Copper
MIG:
Steel
Stainless
Aluminum
Chrome Moly
Stick:
Steel
Stainless
Aluminum
TECH SPECS
Type:
Digital/Micro-controlled IGBT Inverter
Output /Process Type:
MIG, DC TIG, DC Stick
Voltage/phase:
DUAL VOLTAGE 120/240 1 PHASE
Max Rated MIG Amps:
240V @ 210A
120V @ 125A
Max Rated TIG Amps:
240V @ 210A
120V @ 125A
Max Rated Stick Amps:
240V @ 175A
120V @ 100A
MIG Amps/Volts @ Rated Duty Cycle:
240V
210A/24V @ 35% Duty Cycle/40º C
160A/22V @ 60% Duty Cycle/40º C
130A/20.5V @ 100% Duty Cycle/40º C
TIG Output Amps/Volts @ Rated Duty Cycle:
240V
210/18.4V @ 40% Duty Cycle/40º C
160A/16.4V @ 60% Duty Cycle/40º C
130A/ 15.2V @ 100% Duty Cycle/ 40º C
Stick Amps/Volts @ Rated Duty Cycle:
240V
175A/27V @ 35% Duty Cycle/ 40º C
130A/25.2V @ 60 % Duty Cycle/ 40º C
100A/ 24V @ 100% Duty Cycle/ 40º C
Max Inrush ( I1MAX ) Amps:
@120V:  33A
@240V:  36A
Maximum Rated (I1EFF ) Input Amps:
@120V:  21A
@240V:  23A
OCV:
MIG: 60V
TIG:  60V
Stick:  60V
MIG Output Range:
240V:  30A-200A/15.5-24V
120V:
DC Lift TIG Output Range :
240V:  10A-200A/10.4V-18V (HF Start and Lift Start)
Stick Output Range:
240V: 10A-175A/15.5V-24V
Variable MIG Inductance/Stick Arc Force Control:
Yes
Spool Gun Capable:
Yes
Pulse:
No
Standard Drive Roll wire size:
.023”-.030”
Separate wire feeder:
No, self contained
Number of Drive rollers:
2
Max Wire Feed Speed:
600 IPM
Max Wire Roll Diameter:
8” (up to 12 lb)
Memory:
Yes
Upslope Time:
5 Seconds
Down Slope Time:
5 Seconds
Preflow time:
0-10 Seconds
Post Flow Time:
0-10 Seconds
Foot Pedal:
Standard
Flux Core:
Yes, Optional
Air Carbon Arc:
No
2T/4T /Torch latch/Trigger:
Yes
Other Features:
High Frequency Start and Lift start capability in TIG mode
Synergic MIG allows easy setup and adjustment
NOTES
Product Notes:
Product Notes:
Minimum Generator Wattage needed for maximum output on 240V: 8500 W
NOTE: Use only with a generator rated by its manufacturer as "clean power" if using with a generator.  Consult manufacturer of generator for certification. Everlast does not approve or endorse generator brands or models, however, if the damage to the welder occuring from use with a generator not labeled as producing clean power by its manufacturer is not warrantable.
Appearance of accessories and consumables may vary from what is depicted.
This unit is not recommended for welding with E 6010 electrodes
MINIMUM/MAXIMUM
Minimum/Maximum:
MIG:
Weld up to a maximum of 3/8"  single pass*
Weld up to a maximum of 5/8" multi-pass
Weld  a minimum of 24 gauge
* Single pass welds greater than 1/4" are not recommended as a sound welding technique.
TIG:
Weld up to a maximum of 1/4" single pass
Weld up to a maximum of 5/8" mult-pass
Stick
Weld with a maximum of 1/8" diameter electrode
Weld with a minimum of 1/16" diameter electrode
Returns
For returns, contact must be made within72 hours of delivery so an RMA number is issued. If there is damage, we can help file a damage claim immediately.
DOA items: In the event you receive a non working unit , we will exchange it free of charge.
Items returned must be in an GOOD condition. We will inspect all returns before accepting the package. We will not accept packages that have missing parts, damages, and packages that have not been approved for return by our initial contact or packages missing an RMA number. These packages will be refused and sent back to YOU at your cost.
Shipping Information:
1- We have an onsite professional shipping and packaging department and adhere to all shipping guidelines.
2- We will try to ship orders as soon as possible after payment approval unless otherwise stated in description. NOTE: Since there are many ways we offer our products, on rare occasions there is a chance an item may go out of stock that we have listed and sold on eBay. We will do our best to expedite backordered items as soon as possible.
3- Please provide a physical address. We will not ship to a PO Box.
4- Shipping charges are for the (48) Continental United States only.
5- We don’t ship to Canada
6- We charge CA tax on all orders 9.5%
7- If you pay via PayPal, shipping will be to your confirmed address only
8- Shipping to AK, HI and PR is more. please email for price.
Contact
Operating Hours:
Monday through Friday: 9AM to 5PM PSTSaturday: 11AM to 4PM (PST)