2021 New PowerPlasma 82i 80 Amp Plasma Cutter w/ CNC Package, iPTM-80 CNC Torch

Description

Power i-TIG 200T
310 579 2075
Home
About Us
Contact Us
Shop Policies
FAQ
Feedback
Store categories
DC TIG Welders
ACDC TIG Welders
MIG Welders
Stick Welders
DC Combo
ACDC Combo
MTS Combo
Coolers
Accessories
Plasma Cutters
Generators
SKU:
Plasma82i-CNC-Pkg
Product Description
If you are looking for a professional level plasma table machine that you aren't likely to quickly out grow, the Everlast PowerPlasma 82i with the CNC package is likely the one that you'd choose.  The portability, power, and performance, combine with the price to make the PowerPlasma 82i one of the best choices available in it's class when you consider power/purchase cost ratios.  You get the best cut per amp per dollar paid for the PowerPlasma 82i CNC over any other 80 amp cutter in it's class. For routine daily use, the unit is recommended for cutting 5/8" thick plate metal.  And for maximum cut capability on CNC, this unit is capable of producing quality cuts of 1" or greater (at reduced speeds).   Considering the purchase price, where else will you find a plasma cutter ready for plasma table use with a built in CNC socket and CNC torch?  Regarding portability, the unit's size is compact and can be easily stored or placed near the work area.  The new Italian designed iPT 80 machine/CNC torch is rugged and features improved consumable life with the patented "back striking" design.  This blowback design torch comes with a variety of consumable choices, shielded and unshielded.  True it has a professional feel, capability and performance, but it also offers something for the hobbyist, with standard 240V operating input, which makes it right at home in any well equipped home shop plasma table or garage.
PRODUCT EXTRAS
Features & Benefits:
Easy starting with Blow Back Pilot arc allows easy cutting of rusty and painted metals
Cuts virtually any type of metal with ease
Simple to use torches with inexpensive service parts and consumables
Commercial/Industrial class, 60% Duty cycle at 80 amps
Clean, smooth cuts and improved consumable life with the new Italian designed iPT 80 torch
Blowback start starts arc without the need of High Frequency which can interfere with surrounding electronics
Pilot arc improves performance and cutting on dirty, painted, or rusted metals
3 Second pilot arc tip saver feature shuts down pilot arc after 3 seconds of contiuous operation if no cutting is present to prevent premature consumable wear
Adjustable post flow control up to 50 seconds to improve consumable and torch life
Front air pressure gauge allows quick verification of air pressure
Over Current and Duty Cycle protection indicates fault with a dedicated warning/diagnostic light, and shuts down output until condition is resolved
IGBT modules improve reliability and performance while reducing overall weight
CNC socket and CNC torch for plasma table use.
WHAT'S INCLUDED
Standard Equipment:
25ft Italian designed and patented iPT-M 80 Machine CNC torch with Euro quick-connect central adapter
Work clamp with 10ft. cable and DINSE connector
Air pressure regulator/water trap (Separate air dryer is required to reduce consumable wear and prevent torch damage)
Consumable starter kit
OPTION
Optional Equipment:
15 ft iPT-80 hand-held torch
25 ft iPT-80 hand-held torch
Welding cart
Consumable kit
RECOMMENDED USES
Recommended Areas of Use:
Home shop
Motosports
Farm/Ranch
Commercial fabrication
Factory maintenance
HVAC
CNC
Recommended Metals:
Steel
Stainless
Aluminum
Copper
Titanium
Nickel/Nickel alloys
Virtually any metal including cast iron
TECH SPECS
Type:
IGBT
Voltage/phase:
220/240 V 1 Phase
Output Amp/Volt Range:
20-80A/88V-112V
OCV:
240V
Max Inrush ( I1MAX ) Amps:
@ 240V: 58A
Maximum Rated (I1EFF ) Input Amps:
@240V: 45.2A
Duty Cycle At Rated Amps/Volts:
60% @ 80A/112V
100% @ 63A/105V
Arc Start Type:
Blow Back (Piston type)
PilotArc:
Yes
Torch Type:
Italian designed iPT 80 machine torch
(Hand torch not included)
CNC Interface Port:
Yes
Adjustable Post Flow Timer:
Yes
Gouging:
Light to Medium
Recommended Cutting Air Pressure:
75psi
Recommended Compressor Capacity:
7CFM @ 90 psi/60 gallon tank
OK-to-Cut Indicator/Low Air pressure safety:
Yes
NOTES
Notes:
A separate inline air dryer must be provided by the customer to prevent torch damage, and excessive consumable wear. The unit includes a regulator/water trap, but is not designed to remove all water or moisture.
If using with a generator, use a generator rated by its manufacturer as providing "clean power".  This is usually 5% or less THD (total harmonic distortion).
Use with a geneator rated for at least a minimum of 15,000 surge watts.
This unit does not include a hand torch
.
MINIMUM/MAXIMUM
Minimum/Maximum:
Up to 5/8" daily use with CNC (rated for best cut speed and quality)
Up to 1" clean cut with CNC (edge start)
Up to 1 3/16" severance cut @ 3-5 ipm
Pierce up to 1/2-5/8" with auto THC
Plasma cutting capacity is affected by several factors.  Ideal cutting conditions require dry air, new consumables, proper air pressure etc.   Quality of cut depends upon consumable orifice size, standoff height,  and travel speed
Returns
For returns, contact must be made within72 hours of delivery so an RMA number is issued. If there is damage, we can help file a damage claim immediately.
DOA items: In the event you receive a non working unit , we will exchange it free of charge.
Items returned must be in an GOOD condition. We will inspect all returns before accepting the package. We will not accept packages that have missing parts, damages, and packages that have not been approved for return by our initial contact or packages missing an RMA number. These packages will be refused and sent back to YOU at your cost.
Shipping Information:
1- We have an onsite professional shipping and packaging department and adhere to all shipping guidelines.
2- We will try to ship orders as soon as possible after payment approval unless otherwise stated in description. NOTE: Since there are many ways we offer our products, on rare occasions there is a chance an item may go out of stock that we have listed and sold on eBay. We will do our best to expedite backordered items as soon as possible.
3- Please provide a physical address. We will not ship to a PO Box.
4- Shipping charges are for the (48) Continental United States only.
5- We don’t ship to Canada
6- We charge CA tax on all orders 9.5%
7- If you pay via PayPal, shipping will be to your confirmed address only
8- Shipping to AK, HI and PR is more. please email for price.
Contact
Operating Hours:
Monday through Friday: 9AM to 5PM PSTSaturday: 11AM to 4PM (PST)